Author |
Message |
Dennis
| Posted on Wednesday, August 11, 2004 - 9:22 pm: | |
I restored this tractor a year ago. Recently started leaking gear oil from rear end between rear end and pto gear box. Found about 1-1/2 gallon of extra oil in rear end. Drained it to normal. Found the hyd system empty of oil. Added the gear oil that was removed from rear end. I replaced the four seals as perscribed in the manuel when restoring the tractor. Obviously the seals are leaking. Any idea's out there. Thanks Dennis |
Ian C. Campbell (Ianc)
| Posted on Wednesday, August 11, 2004 - 10:46 pm: | |
1) Book says put one seal w/lip in and one with lip out. Put both lip in. 2) Check shaft for a slight groove where seals ride, if you can feel a dip try "cheating" the seals a little to get to a new spot. |
Chris Losey (Admin)
| Posted on Sunday, August 15, 2004 - 1:41 pm: | |
The center section of the pump may be cracked as well. Inspect it closely. |
|