| Author |
Message |
    
john
| | Posted on Friday, June 6, 2003 - 11:55 am: | |
the exhaust elbow after the turbo is about 1/8 higher than the turbo ,the short collar is at a angle, it leaks alittle,just had a new exhaust manafold put on it ,can you put a spacer under the turbo or what. thanks john |
Wrenchbender
| | Posted on Saturday, June 7, 2003 - 11:30 pm: | |
If your turbo has the thin steel shim type gasket, you could replace it with a thicker asbestos gasket. That would make up a 1/8" difference. WB. |
|
