Author |
Message |
Kevin
| Posted on Monday, May 20, 2002 - 3:16 pm: | |
I have an Oliver 550 and the wire to the lights has been cut. I know that the wire runs down the left side to the rear axle and the it was cut. I see that to the left head light and rear light that the wire needs to run under the cover on the axle. What I need to know is how the wire runs to the right head light. Does the wire run around the back or over the top to the right axle cover, under the fender and up to the light? |
Chris Losey (Admin)
| Posted on Monday, May 20, 2002 - 11:09 pm: | |
I'll try to remember to check my 550 tomorrow and let you know. |
Chris Losey (Admin)
| Posted on Wednesday, May 29, 2002 - 11:41 pm: | |
Sorry it took so long to get back to you. Been busy farming. Here's a picture of my 550. Can you tell I use it to mow the yard?? The wire crosses under the draft control spring, down to the axle, over to the fender and up the backside of the fender up to the light. Hope this helps. |
|