| Author | Message | ||
     kevin Posted From: 64.194.28.173 |
I have a 1550 oliver just wondering if swapping motors with a 1600 is possible, any info would be greatly appreciated. | ||
| Chris Losey (Admin) Posted From: 67.142.130.34 |
It should bolt right up. About the only problem I can think of is the water pump lining up with the radiator, and the holes in the hood for intake and exhaust. | ||
| John Schwiebert Posted From: 209.143.51.142 |
Which PTO do you have on the 1550 the single speed or the dual speed unit? You may need to swap the long shaft as the engines are not the same length but the transmission case is. | ||
| Chris Losey (Admin) Posted From: 72.35.57.198 |
Good point John, I hadn't thought of that. | ||
| kevin knight Posted From: 64.194.28.173 |
Thanks, for the help anyone know the best source for rebuild kits for the 1550 im in Texas | ||
| Chris Losey (Admin) Posted From: 72.171.0.144 |
I guess that depends on what you mean by best. Best price, there are quite a few places on the internet to check around for prices. I'd personally recommend Ag Parts First ( www.agpartfirst.com ) or O'Brien County Implement ( www.obci.net ) Both are reputable and will give excellent service as well as advice. They will ship as well. You might try Korves Oliver ( www.korvesoliver.com ) as well, but I don't think they carry kits for Olivers as new as the 1550. But they are excellent people to work with as well. | ||
| Chris Losey (Admin) Posted From: 72.171.0.144 |
Crud. That web address is www.agpartsfirst.com I left an s out of it. Sorry about that |
