| Author | Message | ||
     Tractorman1978 Posted From: 76.213.221.223 |
#1) 4 good solid 16 inch Oliver Rooster Comb Plow Rims (aka Number 100 plow rims) with the 6 square bolt holes? #2) Several Oliver plow straight adjusting handle plow springs (for the Number 214, 216, and Rooster Comb # 100 Plows)? These springs will have a threaded piece with a long bolt at the top of the spring and a hook at the bottom. #3) Parts for a two bottom 4220 (I think) newer style Rooster Comb plow straight plow depth adjusting handle? This plow has the trip back bottoms but it has the Rooster Comb Arm. Plow was probably made in the 1950's. #4) Front steel wheels for an Oliver Rooster Comb #100 plow? #5) The smaller frogs for the Oliver TNT Rooster Comb Plows? The smaller frogs act like a subsoiler and are located directly behind the factory larger mouldboards? These parts might have to be reproduced or made from another factory frog, which I have. I might also need the Rooster Comb arm that raises and lowers the the TNT Plow. #6) Need a rear solid rim and grease cap for an Oliver pull type 3 wheel Adjustable plow on rubber or an Oliver Heavy Duty Plow. The rear grease cap might have RP 565 stamped into the cast. Also, the grease cap will have LEFT HAND THREADS. Usually, this rear rim and grease cap is found on the older Oliver plows that have a spring on top of the rear tailwheel assembly. | ||
| gfagan Posted From: 150.243.70.14 |
Need parts? I will have a Oliver pull-type plow in my March 15, 2008 auction. If you are interested check my website @ www.faganauctions.com Also many parts books, manuals, tractors, and parts. |
