| Author |
Message |
    
Eric B
Posted From: 167.127.107.11
| | Posted on Saturday, December 1, 2007 - 7:03 am: | |
I'm looking for a Super 55 engine block.
Thanks
Eric |
Eric B
Posted From: 167.127.107.11
| | Posted on Saturday, December 1, 2007 - 7:06 am: | |
It is a gas engine.
Thanks
Eric |
John Schwiebert
Posted From: 209.143.51.220
| | Posted on Saturday, December 1, 2007 - 9:19 am: | |
Gas & Diesel blocks are the same. Can I ask what is the problem with your block? |
Eric B
Posted From: 167.127.107.11
| | Posted on Saturday, December 1, 2007 - 11:51 am: | |
The block is cracked. I had too much water and not enough antifreeze in the coolant system and it froze. It now has a crack about 12 inches long behind the carb running length wise with the block. I may be interested in a complete or partially complete engine as well.
Thanks
Eric |
Ian C. Campbell (Ianc)
Posted From: 69.11.187.34
| | Posted on Tuesday, December 4, 2007 - 12:21 pm: | |
We may have one here. What are your casting numbers? |
John Schwiebert
Posted From: 209.143.51.146
| | Posted on Tuesday, December 4, 2007 - 6:16 pm: | |
If you two get together great. If not I would pin it and have it overwith. I have pinned some older Fords (like 8 & 9N models) that were worse. No problems, |
