Author |
Message |
Matt Dues
| Posted on Thursday, May 18, 2006 - 10:31 pm: | |
does anyone know where i can find the front half of a pto shaft for and oliver 480 manure spreader? i need the half that hooks up to the tractor. (540) THANKS |
John Schwiebert
| Posted on Friday, May 19, 2006 - 6:34 am: | |
That will not be as bad as you think. Those PTO shafts to a point are built to a standard. Tell me what size you have and I will work at it from there. Send me a phone number I might even have one less shield laying around. |
dave schrock
| Posted on Saturday, May 27, 2006 - 4:45 pm: | |
see what john has for you there but some of the older New Idea spreaders used the same shaft. I am also told some NH spreaders were the same. There are a lot of machine and welding shops even some TSC stores that can make just about any shaft up |
Matt Dues
| Posted on Thursday, June 8, 2006 - 10:00 pm: | |
john, the shaft for the spreader has a 1 inch by 1 1/8 inch main shaft and the shield has a 3 inch diameter. i need the 540 end of the shaft. email me if you have one. d_matt09@hotmail.com THANKS! |
|